首页
到顶部
到尾部
自动化毕业设计论文

LabVIEW智能车仿真系统的

分享到
时间:2013/1/8 22:03:37  作者:  来源:  查看:222  评论:0
内容摘要:摘要 本课题以智能车比赛为背景,以缩短智能车控制算法的开发周期为目的,基于虚拟仪器LabVIEW开发了智能车仿真软件,为智能车比赛提供可以离线验证控制算法的软件平台。本文首先对智能车仿真模拟系统的运行模型进行了分析,主要包括赛道设计、赛车设计、进行仿真和结果回放四个部分...

摘要

 

本课题以智能车比赛为背景,以缩短智能车控制算法的开发周期为目的,基于虚拟仪器LabVIEW开发了智能车仿真软件,为智能车比赛提供可以离线验证控制算法的软件平台。

本文首先对智能车仿真模拟系统的运行模型进行了分析,主要包括赛道设计、赛车设计、进行仿真和结果回放四个部分,然后根据这几部分进行软件开发,但在实际开发中并没有完成所有功能,只完成了其中智能车仿真系统的一部分,并对该部分的开发过程进行了详细的分析。

 

关键词:LabVIEW;仿真;智能车;虚拟仪器


ABSTRACT

    Tsinghua University hosted the firth college student competition, the "Freescale" Cup. The participants are required to provide the intelligent vehicle model capacity of the self-road-recognize based on the designed model-car and the micro-controller chip. The winner was the first one finished the race on the right road.

Based on this competition, this paper, aims at reducing the development period of the control algorithm, provides the software platform for the off-line test of the race car control algorithm by using LabVIEW.

This paper firstly intelligent vehicle simulation system operation model are analyzed, a simulation analysis system has four functions, namely the circuit design, the car carries on the simulation, and design, and then according to the results of playback software development, but the framework in developing and not finished all the functions of intelligence, only completed the car mode, and the system in the development process of parts are analyzed in detail.

 

Key word: LabVIEW; simulation; Intelligent vehicle; Virtual instrument


Tags:智能 仿真 系统 系统的   


客服QQ:496889925   电话15831080855
冀ICP备11001230号
Powered by OTCMS V2.3